If you wish to perform a batch print, follow the steps below:
1. Go to File Print.
2. Within the Settings menu, click on the Print Type drop down menu and select Batch Set.
3. Within the Settings menu, click on Batch Print Properties to configure the batch print set.
4. Click on OnDemandBatchSet.prs or select any available previously created print set.
5. Select the view types you wish to add to the batch print and click Add.
6. This will add the view to the print set views.
If you wish to remove a view, select the view in Print Set Views and click Remove.
To rearrange the view order, click the view in Print Set Views and click Move View Up / Move View Down.
7. Click on the drop down menus to set the settings for Orientation, Print To, Include Print Areas, Printer. Press OK to complete configuration.
8. Select the printer and click Print.
(If you wish to save the batch print as PDF, select your printer as Send to PDF and click Print).
If you wish to create a new batch print set, please refer to the article on How to Create a New Batch Print Set in 2020 Fusion
You may also refer to the article on An Introduction to Printing in 2020 Fusion
How to Batch Print in 2020 Fusion
